Installing electric underfloor heating is a process that involves several steps and precautions to ensure the efficiency and safety of the system. Here are some key precautions for installing electric underfloor heating:
Preliminary preparation: Before installing electric underfloor heating, a needs assessment is necessary to clarify the area of the house, the rooms used, and the desired underfloor heating effect in order to select the appropriate electric underfloor heating system. At the same time, choosing the right materials and equipment is also essential to ensure the stability and efficiency of the system. 1
Floor preparation: Make sure the floor is flat, dry, and free of debris. If the floor is uneven, leveling is required. The flatness of the floor is the basis for ensuring uniform heat dissipation of the electric underfloor heating system.
Installation of insulation layer and reflective mat: The insulation layer is used to prevent heat from going downward and improve heating efficiency. The reflective mat is used to reflect heat and further improve the heating efficiency. The installation of these two layers of materials must be uniform and tight to avoid gaps.
Install the electric heating cable or electric heating mat: According to the design plan, lay the electric heating cable or electric heating mat on the floor. The cables should be evenly distributed to avoid overlapping or crossing. The electric heating mat should be installed according to the requirements of the instructions, and the joints should be insulated.
Install the thermostat: The thermostat is an important part of the electric floor heating system, which is used to adjust and control the indoor temperature. The thermostat should be installed in places where the air temperature is uniform, and should not be installed in places where the temperature changes greatly, such as corners, doors and windows. 2
Lay a waterproof layer: Lay a waterproof layer on the electric heating cable or electric heating mat to prevent moisture from entering the electric floor heating system and protect the safety and service life of the electric heating cable or mat.
System test: Before laying the surface layer, the electric floor heating system must be tested to ensure that the system is fault-free before the next construction step can be carried out.
Power supply requirements and safety: Ensure that the power supply is safe and reliable, and comply with relevant electrical safety standards. The power cord should be of appropriate specifications and avoid series connection.
Floor material selection: Select floor materials with good thermal conductivity to ensure that heat can be evenly distributed throughout the floor. Avoid using moisture-proof mat, because moisture-proof mat is heat-insulating and will affect heat transfer.
Professional installation: The installation of the electric floor heating system must be carried out by professionals to ensure the normal operation and safe use of the system.
Maintenance: After the electric floor heating is installed, the system must be cleaned and maintained regularly to ensure its normal operation and extend its service life.
By following these precautions, the safe, stable and efficient operation of the electric floor heating system can be ensured, providing users with a comfortable heating experience.